• a typical value of 3.1 perms.

INSTALLATION METHOD:

The following installation instructions are given as a general guide to avoid common errors. Installer should follow best practices for construction and workmanship. Acoustical Solutions bears no responsibility for installation or contractor selection. Installation should not commence until building is enclosed and under standard occupancy conditions and surfaces are of acceptable condition and properly prepared. Do not install materials of unacceptable quality. Must be used between two rigid layers; one layer must be porous; e.g. drywall, plywood, OSB. Green Glue is not a sealant or adhesive, therefore fasteners are necessary. Intended for interior use only. Maintain temperature of 60⁰F – 80⁰F within building after installation. Not to be used in conjunction with a construction adhesive. Product intended to reduce sound transmission between rooms and does not affect noise within a room.

• Apply compound using Green Glue Applicator Gun
• Complete coverage is not necessary to obtain excellent results
• Green Glue dispenses with very little effort
• Green Glue will not flow off the board during installation
• Reference installation guide in documents tab
• Allow Green Glue 30 days of drying time for optimal sound isolation performance. Green Glue must be allowed 7 to 10 days of drying time before sound isolation will start to improve.
• Drying times vary per application.
• Storage: This product can be DAMAGED BY FREEZING. Store in a cool, dry location at room temperature.
• WARNING: This product can expose you to chemicals including Crystalline silica which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.