Tracking number: 1Z9XV3020342824044(154566949629)Green Glue Soundproofing Damping
$317.90
FEATURES:
Applies in just minutes
Improves sound transmission loss
Helps block sound
Superb low frequency attenuation
Easy to apply
Non-toxic
RECOMMENDED COVERAGE:
(1) 5-gallon bucket will cover approximately 365 square feet
TECHNICAL INFORMATION:
Size: 5-gallon bucket
Color: Green
Odor: Mild, none after drying
Weight: 8.6 +/- 0.5 lbs./gal.
Solid Content: 61% +/- 5%
Viscosity: Light Paste 52,000-56,000cps (#RV-6 @ 10rpm)
Working Time: 15 minutes
Working Temperature: 40⁰F to 90⁰F (4⁰C to 32⁰C)
Cure Time: 30 Days
Coverage: Approximately 365-730 sq. ft. per 5-gallon pail
Shelf life: One year
Surface Burning Characteristics (Tested by UL Canada according to CAN/ULC-S102-10, Standard Method of Test for Surface Burning Characteristics):
Flame Spread: 10
Smoke Developed: 5
Mold Resistance: Certified by UL Environment to be Mold Resistant per ASTM D3273-00.
VOC: Certified by UL Environment as No formaldehyde emissions detected – meets the requirements of CA Section 01350
Water Vapor Transmission: Tested in accordance with ASTM E 96 for water vapor transmission and shown to not form a vapor retarder with a typical value of 3.1 perms.
INSTALLATION METHOD:
The following installation instructions are given as a general guide to avoid common errors. Installer should follow best practices for construction and workmanship. Acoustical Solutions bears no responsibility for installation or contractor selection. Installation should not commence until building is enclosed and under standard occupancy conditions and surfaces are of acceptable condition and properly prepared. Do not install materials of unacceptable quality. Must be used between two rigid layers; one layer must be porous; e.g. drywall, plywood, OSB. Green Glue is not a sealant or adhesive, therefore fasteners are necessary. Intended for interior use only. Maintain temperature of 60⁰F – 80⁰F within building after installation. Not to be used in conjunction with a construction adhesive. Product intended to reduce sound transmission between rooms and does not affect noise within a room.
Apply compound using Green Glue Applicator Gun
Complete coverage is not necessary to obtain excellent results
Green Glue dispenses with very little effort
Green Glue will not flow off the board during installation
Reference installation guide in documents tab
Allow Green Glue 30 days of drying time for optimal sound isolation performance. Green Glue must be allowed 7 to 10 days of drying time before sound isolation will start to improve.
Drying times vary per application.
Storage: This product can be DAMAGED BY FREEZING. Store in a cool, dry location at room temperature.
WARNING: This product can expose you to chemicals including Crystalline silica which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.